POOL BUILDING: FOUR DESIGN CONSIDERATIONS

pool building

When you are designing pool areas or looking for a concrete pool builder, it is crucial you remember there are various design considerations.

For example, you have to remember that people behave differently if they are minimally clothed. Therefore, you have to remember that there is a need to increase personal space when you are building a pool.

Here are four design considerations you would want to think of before you build a pool.

 

Surface Finishes

When looking for pool surface finishes, it has to be based on various factors, including safety and visual appearance. Other factors include hygiene and ease of maintenance.

For many pool builders, natural stone is a good choice in pool areas. However, manufactured tile finishes have good slip-resistance ratings.

If you are going for natural finishes, including slate, you have to think about it very carefully, since they may delaminate over time.

Because it is soft and get quickly eroded, limestone should generally be avoided in wet areas.

Non-slip surfaces are equally important in critical areas, which include the treads of your pool’s steps.

 

Pool Types

The pool’s aesthetics are primarily dependent on the type of pool you would choose.

There are generally two types of pools. First, an overflow pool is frequently chosen when it comes hydrotherapy spas since they can be designed as infinity pools. The second one is a freeboard or skimmer pool, where the water level is below the pool deck, resulting in a visible edge.

Pools do not only differ in their looks. They also function differently, when it comes to the treatment as well as flow of pool water. For example, an overflow pool will need to use a balance tank so as to store the overflow of surface water. There, the displaced water gets captured and treated first before it gets pumped back into your pool.

However, a skimmer pool may not have the capacity to constantly renew its surface water. What does this mean? Overflow pools can become efficient as far as treating surface water. That is an important factor since surface water, which carry three-fourths of a pool’s pollution, is ingested often by swimmers.

 

Pool Finishes

In most cases, pools usually have tiles, which would come either in mosaic or larger format. Also remember, non-slip tiles are important especially around stairs as well as shallow areas. It is not recommended to have natural stone or slate since they are porous and discolour. If you are considering them for your pools, it is important you check them with prior chemicals first before you install them. You can also use a rendered finish first between the concrete structure and tile to increase waterproofing.

You can also use PVC liners, although they are frequently used in large pools. But if there is a need to have a budget pool finish but at the same time is watertight. These can be used in both stainless and concrete steel pools. PVC lines come in different colours. Pick one that best suits your pool.

 

Design Considerations

Pools are quite complex to build, let alone manage. This means your design considerations should carefully include your water treatment, user safety, as well as pleasing aesthetics. The pool’s water treatment system should be a huge part of your architectural and electrical design.

At the first stages of your project, after selecting the type of the pool that you want, to look at the various key factors:

  • Bather load (needed to know your pool and plant sizing)
  • Pool size and volume
  • Location of the pool
  • Location of your balance tank
  • Level of pool as well as balance tank

Read Also:

Safe Water Treatment Options for Your Pool

Exercise Ideas for Pool Owners

Leave a Reply

Your email address will not be published. Required fields are marked *

Close

Social menu is not set. You need to create menu and assign it to Social Menu on Menu Settings.